|
|
| Digital Collage Sheets Home Page | My Blog | Contact Us | How To Decoupage Furniture | Make Your Own Labels | How To Recycle Jars Tutorial | ViewCart/Checkout | |
|
 How I Make Sticker or labels
There are many sticker making products that you can buy at the local computer or craft store. Many require special laser printers, ink sets, custom papers, and cartridges. When you finish buying all the products and accessories, that sticker now cost you hundreds of dollars!
Well, I already have an inkjet printer attached to my home computer; so why would I want to purchase more equipment.
So, I created a way to make my own stickers for pennies using a standard inkjet printer and a roll of inexpensive packing tape.
Your sticker will have a rich shiny finish using this simple technique.
How I make stickers Instructions
First, I cut out my image
Place face down on 2 inch packing tape
Press image into tape
Cut out image leaving a little tape around the image
Now I have a sticker!
For larger images use clear contact paper.
Here's a tip: If you're selling your stickers, you may want to seal the back as well. To do this, start with your picture face up on the taper. Cut out the image exactly, leaving no extra tape; then follow the instructions above.
Please note: I left the air bubbles under the tape on top so you can see the label but you would press it down firmly to remove the bubbles. See the bottom of the label has no bubbles.
|
| © All rights reserved • Collage Sheet Girl • Powered by pappashop.com | Site Design by Avalon Rose Design | |